Upgrade Kit for iPhone 11 series

1. Loosen thumbscrews on the base of the Beastgrip Pro and remove the lens mount assembly.

Loosen screws (#1, #2, and #3) with the included allen wrench and remove the upper arm (A) and lens mount handle (B).

Slide-out the lens mount (C).

2. Slide-in the upgraded lens mount (D).

Place the upper arm (A) and lens mount handle (B) back onto the lens mount assembly and re-tighten screws (#1, #2, and #3).

Re-insert the lens mount assembly to the base of the Beastgrip Pro and re-tighten the thumbscrews.

Two different lens lens mount plates are included to accommodate different phone camera sizes and setups. For a detailed explanation on which plate to use, please refer to the Beastgrip Pro user guide.

1. Use the included allen wrench to loosen the screws and remove Plate B from the lens mount.

2. Insert Plate A into the lens mount and re-tighten the screws.