Getting started
1. Connect the vertical and horizontal handles with the wing nut screw.
///first image
The wing nut screw has an adjustable head. Once the screw is tightened, pull out the screw head and rotate it to the desired position, if needed.
2. Slide in the rails and lock them in place with the wing nut screws.
///second image
3. Attach your Beastgrip Pro (or camera) to the mounting block using the 1/4"-20 thumb screw mount.
//third image
4. Slide the mounting block onto the rails to the desired position and lock it in place with the wing nut screws.
//fourth image
You can mount your Beastgrip Pro (or camera) wither front-facing for action shots or side facing for more stability when holding it with two hands.
///fifth image
Accessorizing
The BGS-300 includes nineteen standard 1/4"-20 threaded mounts for attaching additional accessories like code shoe mounts, LED lights, microphones, articulating arms, etc. and one 1/4"-20 tripod mount on the bottom of the mounting block for attaching support gear, like tripods, sliders, etc.
//sixth image
Cold shoe mounts can be mounted front-facing or side-facing, based on your needs.
