Adding the upgraded lens mount
1. Loosen thumbscrews on the base of the Beastgrip Pro and remove the lens mount assembly. Loosen screws (a, b, and c) with the included hex key and remove the upper arm and lens mount handle. Slide out the lens mount.
2. Slide in the upgraded lens mount. Place the upper arm and lens mount handle back onto the lens mount assembly and re-tighten screws (a, b, and c). Re-insert the lens mount assembly to the base of the Beastgrip Pro and re-tighten the thumbscrews.
Adding the upgraded lower clamp jaw
Because the camera module is located in a higher position on the iPhone Plus Models, the upgraded lower clamp jaw must be used to allow the lens mount to align correctly with the camera.
Loosen screws (d and e) with the included hex key and remove the lower clamp jaw. Insert clamp jaw upgrade and re-tighten screws (d and e).