M Series Lenses User Manual
The Beastcage™ includes two interchangeable lens mount plates. The 37mm lens mount plate comes pre-installed. To use M Series Lenses please install the M Series bayonet mount plate first!
Use the included hex key to swap the lens mount plate.
ATTENTION: to avoid stripping or damaging the threads, DO NOT OVERTIGHTEN the screws.
Mount the lens
1) Align dots on the lens and the bayonet mount plate
2) Place the lens into bayonet mount, then rotate 90° clockwise to lock
Attach the lens hood
Both M Series 2X Telephoto Lens (A) and M Series 0.6X Wide Angle Lens (B) comes with detachable dedicated lens hood. To mount the hood, slide it on as shown on image below.
M Series 1.33X Anamorphic Lens Alignment
The M Series 1.33X Anamorphic Lens has a rotating barrel to align optical elements in proper position. After lens is installed, rotate the barrel clockwise 90 degrees for proper horizontal orientation, if necessary.
BeastCam (coming soon), FiLMiC Pro, Filmakr, MAVIS, ProMovie Recorder, MoviePro, Guerrilla Filmmaker, Desqueeze (photo & video resizer)